Native TCT User Guide-v1.0
g.
Before finished test deactivate the accessibility by run “sh-3.2# vconftool set -f -t bool
db/setting/accessibility/tts 0”.
h.
If the corresponding event signals mgs are changed then press Pass Otherwise, press Fail.
Figure 3-131: DALi Accessibility Manager Flick
DALi Accessibility Manager Tap
To perform the test:
a.
Run tbtcoreapp
b.
Activate the accessibility by run "sh-3.2# vconftool set -f -t bool
db/setting/accessibility/tts 1" on target shell with root on mode"
c.
One finger single tap on DALi Accessibility Manager Tap. Then focused this with yellow
box
d.
One finger double tap on DALi Accessibility Manager Tap.
e.
One finger up/down on screen focus control are move then action read signal will call
f.
One finger double tap on focused control then action activate signal will call.
g.
One finger triple tap on screen then action zoom signal will call.
h.
Two fingers triple tap on screen then action read indicator information signal will call
i.
Two fingers single tap on screen then action read pause resume signal will call
j.
Two finger double tap on screen then action start stop signal will call
k.
One finger flick right/left on screen to change the focus control then action read next and
action read previous signal will call.
l.
Before finished test deactivate the accessibility by run "sh-3.2#</b> vconftool set -f -t
bool db/setting/accessibility/tts 0"
m.
If the corresponding event signals mgs are changed then press Pass Otherwise, press Fail.