NATIVE TCT Скачать руководство пользователя страница 150

Страница: 150 / 162

Native TCT User Guide-v1.0

Figure 3-225: Widget

4.2.2.23

Push Service

To perform the test, select Push Service from the test case list. There are two tests. Firstly,

Press Start button to start the push service and a successful response will be displayed.

Then long press the Home button and clear the application instance

After a few moments, there will a notification.

Click on the notification and the message will be shown.

Secondly, Press button Start to start the push service.

Press button Message.

After a few moments a message will be shown.

Press button Disconnect to disconnect Push Service

If all steps are competed perfectly, then the test can be considered as success. Internet should

be connected.

Figure 3-226: Push Service

4.2.2.24

Runtime Info

To perform the test, select Runtime Info from the test case list. There are 9 scenarios in

runtime-info.

Audio Jack

[

Not supported in wearable] There are two test steps.

Firstly,

Initial page will show Audio Jack Not Connected, connect headphone in audio jack.

Then message will show “Audio Jack Connected with 3 wire ear jack” or “Audio Jac

k Connected with 4 wire ear jack” according to the type of air jack connected. If Audi

o jack is not supported, “Audio Jack is not supported” will be shown. Audio Jack can

Содержание TCT



































































































































































Результаты поиска

Содержание TCT

Отзывы:

NATIVE TCT, Руководство пользователя, Страница: 150 / 162

Результаты поиска

Содержание TCT

Отзывы: