▪
The
GAIN
knobs (at the top of channels A and B) are turned up
▪
The channel faders are up
▪
The
FILTER
and EQ band knobs (
HI
,
MID
,
LOW
) are in their center position.
For a description of pre-listening tracks, refer to
.
3.3
Adding a Microphone Or Other Audio Source
You can also plug a microphone and an additional audio source (line level) into the back of
your Z2. Note that the monophonic microphone signal will be summed to both stereo channels
of the main (and booth) outputs. The auxiliary stereo audio source (an MP3 player or CD player
output, for example) will also be summed directly into the output bus. In other words, the Z2's
crossfader and channel faders will have no effect on these inputs.
To connect a microphone:
1.
Make sure the
VOLUME
knob in the
AUX / MIC
part of the upper-left corner of the top
panel of the Z2 is turned down.
2.
Plug your mic into the
MIC
input plug of the
AUX / MIC
area on the rear panel of the Z2.
3.
Press the mic button next to the
AUX / MIC
VOLUME
knob of the upper-left corner of the
top panel.
4.
Slowly turn up the
VOLUME
knob until you reach the desired microphone volume level.
(Be careful with feedback!).
Plugging in a line-level audio signal is just as easy:
1.
Make sure the
AUX / MIC
VOLUME
knob is turned down.
2.
Plug in your device with a standard RCA-type audio cable to the
AUX
inputs of the
AUX /
MIC
input section on the rear panel.
3.
Make sure your device is outputting audio.
4.
Turn up the
VOLUME
knob on the upper left of the Z2's top panel until you reach the de-
sired auxiliary audio volume level.
Using the Z2 as a Stand-alone DJ Mixer (Direct Mode)
Adding a Microphone Or Other Audio Source
TRAKTOR KONTROL Z2 - Manual - 15
Содержание Traktor Kontrol Z2
Страница 1: ...Manual ...