Native Instruments Traktor Kontrol Z2 страница 22 Скачать руководство пользователя

Страница: 22 / 85

4.1.7

Pre-listening

The

HP VOLUME

knob adjusts the volume levels of the headphone output (this affects both

the 1/4-inch and the 1/8-inch jacks on the Z2's front panel in the same way). The

CUE MIX

knob determines whether you hear the main mix only, the cue channel only, or both signals on

your headphones.
Pre-listening to a track works the following way:
1.

Load Decks A and B each with a track and begin playback (see also

↑

4.1.2, Browsing and

Turn the

CUE MIX

knob to the center position.

Adjust the

HP VOLUME

knob to a comfortable level.

With the channel faders up, move the crossfader back and forth to hear one track, then
the other.

Move the crossfader all the way to channel A so that you are only hearing the track on
Deck A.

Press the Cue button

below the

CUE MIX

knob.

→

The button lights up, showing that Deck B is now sent to the Cue channel, which you now
hear in the headphones.

Notice that now, no matter where you move the crossfader, you will still hear Deck B, because
its cue is on.

►

Press Cue button B again to toggle it off and press Cue button

→

You will now hear the track playing on Deck A, no matter what position the crossfader is
in.

You can also send only the Cue signal (without the mix signal) to the headphones or only the
mix signal (without the cue signal):
1.

Press both Cue buttons

and

so that they are both active (illuminated).

Turn the

CUE MIX

knob all the way to the left.

Now toggle the two Cue buttons on and off. Notice that when both Cue buttons are off,
there is no signal at all coming through the headphones.

Press both Cue buttons so that they are on.

Using the Z2 with TRAKTOR (TRAKTOR Mode)

Basics

TRAKTOR KONTROL Z2 - Manual - 22

Содержание Traktor Kontrol Z2






















































































Результаты поиска

Содержание Traktor Kontrol Z2

Отзывы:

Похожие инструкции для Traktor Kontrol Z2

Бренды по названию

Популярные бренды

Native Instruments Traktor Kontrol Z2, Руководство пользователя

Результаты поиска

Содержание Traktor Kontrol Z2

Отзывы:

Похожие инструкции для Traktor Kontrol Z2

Бренды по названию

Популярные бренды