Native Instruments Maschine, Начало работы

Страница: 59 / 69

MASCHINE Getting Started – 59
2. You can see that our Loop now has a couple of equally spread vertical lines in the
waveform: this is where the Slices are going to be applied. As we know the tempo is
identical to our Project tempo, click on a
Uto
in the Control Area; the BPM value will
remain unchanged.
3. Next, select the t
ranS
radio button. This means that the Loop will be sliced according
to the transients detected in the Sample (in contrast to slicing it into sixteenth notes).
You will notice that the vertical lines have snapped to the transients now.
4. Zoom in using the m
aGnIfIEr
I
Con
in the low left of the Slicing Area, then adjust the
Sensitivity by dragging up and down in the Sensitivity field.
5. Now click on the a
pply
Button to slice the currently selected Sample. Alternatively,
click the Slice Dragger and drag it onto another Sound or Group Slot:
Dragging the sliced Sound onto a Sound Slot
6.
The Piano Roll/Keyboard Editor will open automatically after that, and you will see a
couple of notes:
The notes representing the Slices of a Loop