Native Instruments Maschine, Начало работы

Страница: 20 / 69

MASCHINE Getting Started – 20
4.3.2 Adjusting Pattern Length
Hardware
Adjusting the length of Pattern A1 by turning Rotary Encoder 1
To change the Pattern length, press the Pattern Button, then turn Rotary Encoder 1. Dialing
to the right will extend the Pattern, dialing to the left will shorten it. Adjust the step width
of the Pattern Length parameter (Pattern Grid) as described in the previous section.
Software
The Pattern Grid and Pattern Length Menus
The Pattern length is represented by the highlighted area of the Pattern. To change the
Pattern length, click in the Pattern Length Bar at the position you want your Pattern to
end. The Pattern length will resize to the mouse click position, quantized to the Arranger
Grid value. To change the step width that the Pattern length can be resized in, select a
resolution from the p
attErn
G
rId
m
EnU
.