Native Instruments Maschine, Начало работы

Страница: 58 / 69

MASCHINE Getting Started – 58
2. You can now see the Slices of the Sample represented by vertical lines in the wave-
form on the Right Display. As we know the tempo is identical to our Project tempo,
we select “Auto” using Rotary Encoder 1.
3. There are two Slice Modes: “Trans” is detecting the Slices by identifying their tran-
sients, whereas “16th” slices the Loop into equally spread 16th notes. Choose “Trans”
by dialing Rotary Encoder 3.
4. Press Apply (Button 7) to slice the Sample. If you press Button 8 (Apply To), you can
choose a different Sound or Group Slot to put the Slices on.
5. After that the display will automatically change to Keyboard/Piano Roll Mode. You can
now play the Slices using the Pads.
6. If you change the tempo with the Tempo Encoder, you will hear the Loop changing its
tempo accordingly. If you can hear little clicks and pops between the Slices, adjust
the Sensitivity value using Rotary Encoder and slice again.
Software
Click on the Slice Tab.
The Slice Tab on the MASCHINE software
1.
!
Using the “Apply To” function
(Button 8) you can also select
another Group to spread the first 16
Slices on its Pads
%
Jam around with the Slices and
see what you get: you can use
Note Repeat to make them stutter or
just rearrange them by hitting the Pads
whenever you like.