Native Instruments Maschine Mikro MK2, Руководство пользователя

Страница: 274 / 928

5. To change the groove of an individual Sound, hold its pad (or hold SELECT + its pad if
pads are in Keyboard mode) and turn the 4-D encoder. In Keyboard mode you can also
press
SELECT + the pad of the desired Sound, then hold any pad (i.e. any pitch of that
Sound) and turn the 4-D encoder.
6. Press CONTROL to leave Main mode and return to the default Control mode.
Press and turn the 4-D encoder to adjust the value in finer increments.
These shortcuts control the AMOUNT parameter in the SWING page of the Master’s, Group’s, and
Sound’s Groove properties, respectively. See section --- MISSING LINK --- for a detailed description
of these properties.
In the software you can also adjust the Swing amount of your Project via the SWING control in
the Header:
The SWING control in the software’s Header.
Tempo and Tune Shortcuts
1. Press MAIN to enter Main mode (the button must be lit).
2. Press F3 ( TEMPO ).
3. To change the tempo of the Master (i.e. the tempo of your Project), simply turn the 4-
D encoder.
4. To change the tune of all Sounds in a Group, hold the GROUP button, press the pad 9 – 16
of the desired Group (first navigate to its Group bank via the Left/Right Arrow buttons if
necessary), and turn the 4-D encoder while holding
GROUP .
5. To change the tune of an individual Sound, hold its pad (or hold SELECT + its pad if pads
are in Keyboard mode) and turn the 4-D encoder. In Keyboard mode you can also press
SELECT + the pad of the desired Sound, then hold any pad (i.e. any pitch of that Sound)
and turn the 4-D encoder.
6. Press CONTROL to leave Main mode and return to the default Control mode.
Playing on the Controller
Playing Tools
MASCHINE MIKRO - Manual - 274