National PANTHER 5110, Инструкция по эксплуатации

Страница: 47 / 83

Page 37
5110 MACHINE MAINTENANCE
BACK UP BEEPER AND LIGHT
To replace bulb: (FIGURE A)
• Pop off cover with a screwdriver.
• Wearing gloves or using a cloth, replace bulb. Do Not touch bulb. Do not get the oils from your hand on
the bulb.
• Snap cover back on into position.
To replace back-up beeper switch: (FIGURE B)
• Remove two button hexhead screws on each side of the hood.
• Lift hood off and disconnect seat switch and back-up beeper switch.
• Remove both screws from the back-up beeper switch
• Remove and replace switch.
• Re-insert both screws into switch. Firmly tighten.
• Activating arm may need to be adjusted. Beeper should sound when valve handle has 1/3 movement.
If it does not sound with 1/3 movement or sounds to quickly, adjust (bend) activating arm with a needle
nose plier.
• Reconnect back-up beeper and seat switch wires.
• Replace hood and screws.
Figure A
WARNING:
The Back Up Beeper and Light are on the machine for safety. It is important to keep
it in good working condition. Failure to do so could cause bodily injury.
WARNING:
Do Not alter a switch. Do No defeat a safety device.
Figure B
Activating
Arm
Remove
Screws
Disconnect