VXIpc-486 Model 500 Series Hardware and
Software Configuration Form
Record the settings and revisions of your hardware and software on the line to the right of each item. Complete
a new copy of this form each time you revise your software or hardware configuration, and use this form as a
reference for your current configuration. Completing this form accurately before contacting National Instruments
for technical support helps our applications engineers answer your questions more efficiently.
National Instruments Products
•
VXIpc-486 Model 500 Series ID Label Information
–
Model Number
500
566
599
–
Complete Part Number (including 3-digit suffix)
____________________________________________
–
Serial Number
____________________________________________
–
Revision Number
____________________________________________
–
Fixed Disk Type (See ID label on module cover)
____________________________________________
•
VXIpc-486 Model 500 Series Configuration Information (see Chapter 2)
–
Factory Configuration
yes
no
If no, give the following information.
VXIbus Slot/External CLK10 Configuration (Table 2-2)
A*
B C D
E
F
–
External Trigger Input Configuration (Figure 2-9)
Unterminated*
Terminated
–
External Audio/Trigger Output Configuration (Table 2-3)
Trigger Out*
Audio Out
•
VXIpc-EFD External Floppy Drive
Not Installed
Installed
If installed, give the following information
Serial Number
_________________________________________________
Revision _________________________________________________
* Factory
Configuration
