![background image](http://html2.mh-extra.com/html/national-instruments/vision-177-series/vision-177-series_user-manual_4808433016.webp)
Chapter 1
Hardware Overview and Installation
NI 177x Smart Camera User Manual
1-4
ni.com
Figure 1-2.
Connecting the NI 177x Smart Camera to the Power and I/O Accessory
1.
Connect and secure the 17-pin M12 connector on the I/O cable to the
I/O connector on the NI 177x Smart Camera.
2.
Connect and secure the 25-pin D-SUB connector on the I/O cable to
the CAMERA connector on the terminal block.
3.
Connect the power supply output to the 24 V in connector on the
terminal block.
4.
Connect any additional I/O signals necessary for your application to
the appropriate terminal block connector. Refer to the
section of Chapter 3,
, for pin information.
5.
Plug the power supply into an outlet.
When power is first applied to the device, the Power and Status LED
indicators flash red once while internal systems power up. The Power LED
then lights green if power is wired correctly.