![background image](http://html2.mh-extra.com/html/national-instruments/vision-177-series/vision-177-series_user-manual_4808433044.webp)
Chapter 5
Image Sensor
©
National Instruments Corporation
5-5
NI 177x Smart Camera User Manual
There are multiple ways to adjust gain values or enable automatic white
balance adjustment:
•
MAX
—Use the settings on the
Color
tab of the device configuration
page to adjust gain levels or enable automatic white level adjustment.
•
Vision Builder AI
—Use the settings on the
Color
tab of the
Acquire
Image (Smart Camera)
step to adjust gain levels or enable automatic
white level adjustment.
Black Level (NI 177xC Smart Cameras)
The black level specifies the image brightness. Set the black level to the
pixel value which corresponds to true black. If the black level is innacurate,
near-black pixels may be displayed as black or black objects may appear
gray in the output image.
There are multiple ways to adjust gain values or enable automatic white
balance adjustment:
•
MAX
—Use the settings on the
Camera Attributes
tab of the device
configuration page.
•
Vision Builder AI
—Use the settings on the
Advanced
tab of the
Acquire Image (Smart Camera)
step.
Look-Up Table
A look-up table (LUT) transformation maps pixel values in the source
image into other values in the transformed image. For example, you can use
a LUT transformation to improve the contrast and brightness of an image.
Note
NI 177xC Smart Cameras allow you to define a LUT for each color plane in the RGB
color space.
To enable a LUT in MAX, use the
LUT Controls
on the
Camera
Attributes
tab of the device configuration page.
Refer to the
NI Vision for LabVIEW Basics Help
for information about a
using a LUT transformation to improve images in LabVIEW. To open this
document, navigate to
Start»All Programs»National Instruments»
Vision»Documentation»NI Vision
.
Note
Vision Builder AI does not support LUT editing for NI 177x Smart Cameras.