National Instruments SLSC-12101 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 55

National Instruments SLSC-12101 Скачать руководство пользователя страница 42

regulations, and best practices. Additionally, the modules must comply with the requirements
specified in this section.

Module Design Specification Compliance

Use, design, and distribution of this module must comply with the

Switch Load and Signal

Conditioning Module Design Specifications

, as well as the license agreement included in the

SLSC Module Development Kit.

Regulatory Compliance and Markings

All compliance testing and certifications for the SLSC-12101 apply only to the unmodified
module. Any modification to the module requires the removal of regulatory markings.

Cosmetic Alterations

The module should not be deployed as a final product without cosmetic modification. Be sure
to make the following changes:
•

Remove the National Instruments label on the ejector handle. This may be replaced with
another label, such as one with the corporate logo of the module developer.

•

On the front panel, cover or remove the model name and description ("SLSC-12101
Prototyping Module").

•

Customize LED and connector labeling as needed.

•

Add the new model name and pertinent information. A custom overlay may be used for
this purpose. See the

Switch Load and Signal Conditioning Module Design Specifications

for more details.

•

Update the blank SLSC Rear I/O Compatibility Glyph on the SLSC-12101 front panel
with the proper alphanumeric code to reflect the final module rear I/O implementation.
See the

Switch Load and Signal Conditioning Module Design Specifications

for more

details.

SLSC-12101 Bill of Materials

Table 30. Bill of Materials for the SLSC-12101

Reference

Designator

Description

Qty

Manufacturer

Part Number

06

JUMPER, 2 X 1,
0.100 IN (2.54 MM)
PITCH, BLUE,
GOLD-PLATED

3

SAMTEC

SNT-100-BL-G

C001

CAP, SM, 75 PF, 50
V, 1%, COG, CER,
0402, H= .022 IN

1

KEMET

C0402C750F5GACTU

42

|

ni.com

|

SLSC-12101 User Guide

«
...
40
41
42
43
44
...
»

Содержание SLSC-12101
























































Отзывы:

Нет отзывов