SCXI Quick Start Guide
20
ni.com
7.
If you are using an AI module, click the
Cabling
tab.
Note
You will not have to adjust the information in the cabling tab if you are using
standard multiplexed mode operation. If you are using parallel mode operation,
multichassis configuration, or another special configuration, adjust the options on the
Cabling
tab.
8.
Select the DAQ device connected to the SCXI module from the
Which
device connects to this module?
drop-down listbox. In most cases,
the device selected here and the module digitizer are the same.
9.
Select a DAQ device from the
Module Digitizer
drop-down listbox.
The device can be different from the device selected from the
Which
device connects to this module?
listbox.
10. If operating in parallel mode, click
Parallel Mode
.
11. If the module is installed in a daisy-chained chassis, select an index
number from the
Multichassis Daisy-Chain Index
drop-down
listbox. The listbox appears only if two or more chassis have been
added and saved.
12. Click
OK
.
For information about software-configurable properties of the module,
refer to
Measurement & Automation Explorer Help for Traditional
NI-DAQ
or
Measurement & Automation Explorer Help for NI-DAQmx
. To
access this help in MAX, select
Help»Help Topics»Traditional NI-DAQ
or
Help»Help Topics»NI-DAQmx
.
