National Instruments SCXI USB-1357, Руководство по установке

Страница: 3 / 13

NI 1357/1358/1359 Kit Installation Guide 2 ni.com
• Two 8-pin HVAB plugs
• SH9MD-9MD cable (SCXI kits) or USB cable (USB kits)
The NI 1357 kit (4 slots) consists of the following components:
• NI USB-1359 or NI SCXI-1359
• NI SCXI-1359
• One 8-pin HVAB plug
• SH9MD-9MD cable (SCXI kits) or USB cable (USB kits)
Figure 1 illustrates the components of the NI 1357/1358/1359 kit.
Figure 1. Components of the NI 1357/1358/1359 Controller/Adapter Kit
Installing the Kit
Note Install NI-DAQ 7.4 or later before you install the NI 1357/1358/1359 kit.
Complete the following steps to install the NI 1357/1358/1359 kit:
1. Power off and unplug the SCXI chassis. Follow proper electrostatic
discharge (ESD) precautions and ensure high voltage analog
backplane is
not connected before installing the hardware.
1 8-Slot HVAB Backplane Adapter (16 Screws)
2 2-Slot HVAB Backplane Adapter, NI USB-1359
shown (4 Screws)
3 NI SCXI-1359 (4 Screws)
4 8-Pin HVAB Plugs
1
2 3
300V MAX
HV ANALOG
BUS
300V CA
T II
HV ANALOG
BU
S
300V MAX
HV ANALOG
BUS
300V MAX
HV ANALOG
BUS
300V MAX
HV ANALOG
BUS
300V MAX
HV ANALOG
BUS
300V MAX
HV ANALOG
BUS
300V CA
T II
HV ANALOG
BU
S
4