National Instruments SCXI USB-1357, Руководство по установке

Страница: 4 / 13

© National Instruments Corporation 3 NI 1357/1358/1359 Kit Installation Guide
2. Remove the filler panel in an unused SCXI slot.
3. Touch any metal part of the chassis to discharge static electricity.
4. Insert the switch module into the SCXI slot.
5. Screw the switch front panel to the chassis front panel mounting rail.
6. Attach the NI 1359, included with the kit, to the rear of the SCXI
switch module. Ensure that the 10-pin rear connector of the switch
module connects to the lower, right 10-pin rear connector of the
NI 1359 cabled to the computer or the switch controller. Refer to
Figures 2 and 3 to verify the connector positions on the NI 1359.
Figure 2. 2-Slot HVAB Backplane Adapter Connectors
Figure 3. 8-Slot HVAB Backplane Adapter Connectors
1 HVAB Connectors
2 9-Pin DIN Connectors
3 USB Connector
4 10-Pin Rear Connector
1 HVAB Connectors
2 9-Pin DIN Connectors
3 10-Pin Rear Connector
300V MAX
CAT II
HV ANALOG BUS
N114
300V MAX
CAT II
HV ANALOG BUS
300V CA
T II
HV ANALOG
BU
S
1
2
1 1
Front Connectors Rear Connectors (Both)
300V MAX
HV ANALOG
BUS
300V CA
T II
HV ANALOG
BU
S
300V MAX
HV ANALOG
BUS
3
SCXI-1359 USB-1359
4
2
Front Connectors Rear Connectors
1
Front Connectors Rear Connectors
1
3
300V MAX
HV ANALOG
BUS
300V CA
T II
HV ANALOG
BU
S
300V MAX
HV ANALOG
BUS
300V CA
T II
HV ANALOG
BU
S