National Instruments SCXI-1194, Руководство по началу работы

Страница: 11 / 23

4. Power on the chassis.
10-Pin Rear Connector
You must determine the number of pins on the rear connector of your NI SCXI switch module
to choose the appropriate set of steps to cable the switch controller to the switch module.
Refer to the following figure and complete the following steps to cable the switch controller to
an NI SCXI switch module with a 10-pin rear connector for the NI 4021/407x or
NI PXI/PCI-4065.
Figure 4. Cabling an NI 4021/407x or an NI PXI/PCI-4065 to a 10-pin Rear Connector Switch
Module
1
7
6
or
4
5
3
2
1. NI SCXI Switch Module with a 10-Pin Rear
Connector
2. HVAB Connector
3. 10-Pin Rear Connector
4. SH9MD-AUX Cable
5. NI Switch Controller
6. NI SCXI-1359 Cable Adapter
7. NI SCXI-1000/1001 or NI PXI-1010/1050 Chassis
1. Attach the NI SCXI-1359, included with your kit, to the rear of the NI SCXI switch
module. Ensure that the 10-pin rear connector of the switch module connects to the
lower-right, 10-pin rear connector on the NI SCXI-1359.
2. Screw the backplane adapter to the chassis mounting rail.
3. Connect one end of the SH9MD-AUX cable to the AUX IN of the NI SCXI-1359 and the
other end to the NI 407x.
10 | NI Switches Getting Started Guide | ni.com