National Instruments SCB-100A, Руководство пользователя

Страница: 6 / 12

11. (Optional) Configure the DAQ device or module connected to the SCB-100A by
completing the following steps.
a.
In MAX, right-click your DAQ device or module and select Configure .
b. Configure the device or module properties and click OK .
12. Test specific device functionality. Run a Test Panel in MAX by right-clicking your DAQ
device or module and selecting Test Panels . Click Start to test the device or module
functions.
Note
When you have finished using the SCB-100A, power off any external signals
connected to the SCB-100A before you power off your computer.
Mounting the SCB-100A
You can use the SCB-100A on a desktop, or mount it to a panel or a standard DIN rail. For
two-dimensional drawings and three-dimensional models of the SCB-100A, visit
ni.com/
dimensions and search by product name.
Panel Mounting
Three keyholes are located on the back of the SCB-100A for mounting it to a panel or wall. To
mount the SCB-100A to a board or panel, complete the following steps.
1.
Download and print the panel mounting template PDF by going to ni.com/info and
entering the Info Code
scb100amounting
.
2. Using the template, mark the three points on the panel. Verify that the narrow ends of the
panel mounting screw keyholes are pointing up.
3. Screw #6-32 panhead machine screws or M3 panhead machine screws into the points
marked on the panel, leaving room to easily remove the SCB-100A from the panel.
Installed screw height for both screw types (from the wall to the top of the screw) is
5 mm (0.2 in.).
DIN Rail Mounting
The NI 9913 DIN rail mounting kit (part number 781740-01) contains one clip for mounting
the SCB-100A on a standard 35 mm DIN rail. Fasten the DIN rail clip to the accessory using
two FLH #6-32 x 5/16" screws (included in the kit) with a #2 Phillips screwdriver, as shown in
the following figure.
Note The threaded holes on the SCB-100A for DIN rail mounting should not be
used more than five times. Unscrewing and reinstalling the DIN rail clip will
produce a compromised connection between the DIN rail clip and accessory.
6 | ni.com | SCB-100A User Guide