![background image](http://html.mh-extra.com/html/national-instruments/scb-100a/scb-100a_user-manual_710221007.webp)
Figure 4. SCB-100A DIN Rail Clip Installation
Clip the chassis onto the DIN rail with the larger lip of the DIN rail clip positioned up, as
shown in the following figure.
Figure 5. DIN Rail Clip Parts Locator Diagram
1
2
3
1. DIN Rail Clip
2. DIN Rail Spring
3. DIN Rail
Securing the Cover on the SCB-100A
In most cases, attaching the cover with the integrated magnets is sufficient. To permanently
secure the cover to the SCB-100A base, you will need two M3 × 6 (#4-40 × 5/16")
thread-forming Phillips panhead screws, such as Taptite
®
Trilobular
®
screws. You can
purchase Taptite screws from many vendors.
SCB-100A User Guide
|
© National Instruments
|
7