What You Need to Get Started
To set up and use your SCB-100A, you need the items shown in the following figure. You can
find quick reference labels, which specify accessory pinout information for many compatible
products, by going to
and entering the Info Code
scb100alabels
.
Figure 2. SCB-100A Installation Supply List
2
3
4
5
7
8
9
6
1
1. SCB-100A 100-pin Shielded Connector Block Kit
2. 100-pin DAQ Device/Module and Documentation
3. (Optional) Quick Reference Label PDF
4. SH100-100-F Cable (Part Number 185095-0x)
5. #2 Phillips Screwdriver
6. 0.125 in. Flathead Screwdriver
7. 16 AWG to 30 AWG Signal Wire
8. Wire Cutters
9. Wire Insulation Stripper
Getting Started with the SCB-100A
The following figure shows the SCB-100A printed circuit board (PCB) parts locator diagram.
If the kit is missing any of the components in the figure, contact NI.
SCB-100A User Guide
|
© National Instruments
|
3
