PXIe-4309 and TB-4309 (ST)/TB-4309 (MT)
|
© National Instruments
|
17
Terminal Block Removal
To remove the terminal block, refer to Figure 9 and complete the following steps:
Note
The chassis can be powered on or off when removing the terminal block.
1.
Ensure that the devices and circuits connected to the terminal block are powered down.
2.
Loosen the terminal block mounting screw located at the top of the terminal block.
3.
To remove the terminal block:
a.
Raise the latch release using a flathead screwdriver to disengage the latch.
b.
With the latch release raised, grasp the terminal block and pull it away from the
module.
Figure 9.
Removing the Terminal Block from the Module
4.
Store the terminal block in an antistatic protective bag.
1
Mounting Screw
2
Latch Release
3
PXI Express Controller
4
PXI Express Chassis
5
Terminal Block
NI
PXI
e-1
062Q
5
1
2
COO
LING
CLE
ARA
NCE
AN
D F
AN FIL
TE
R M
AINTE
NA
NCE
RE
QUIR
ED.
S
EE M
ANU
AL.
CO
OLIN
G C
LEA
RAN
CE A
ND
FA
N F
ILTE
R M
AIN
TEN
ANC
E R
EQ
UIR
ED.
S
EE M
ANU
AL.
3
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
