8
NATIONAL
INSTRUMENTS
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC) stated in the product specifications. These requirements and limits provide
reasonable protection against harmful interference when the product is operated in the intended
operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may occur
in some installations, when the product is connected to a peripheral device or test object, or if
the product is used in residential or commercial areas. To minimize interference with radio and
television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Safety
This product is designed to meet the requirements of the following standards of safety for
test and measurement equipment:
* IEC 61010-1, EN 61010-1
* UL 61010-1, CSA 61010-1
Note
: For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
* EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity
* EN 55011 (CISPR 11): Group 1, Class A emissions
* EN 55022 (CISPR 22): Class A emissions
* EN 55024 (CISPR 24): Immunity
* AS/NZS CISPR 11: Group 1, Class A emissions
* AS/NZS CISPR 22: Class A emissions
* FCC 47 CFR Part 15B: Class A emissions
* ICES-001: Class A emissions
Note
: In the United States (per FCC 47 CFR), Class A equipment is intended for use in commercial,
light-industrial, and heavy-industrial locations. In Europe, Canada, Australia and New Zealand
(per CISPR 11) Class A equipment is intended for use only in heavy-industrial locations.
Note
: Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical equipment that
does not intentionally generate radio frequency energy for the treatment of material or inspection/
analysis purposes.
Note
: For EMC declarations and certifications, and additional information, refer to the Online
Product Certification section.
Содержание RMX-410 Series
