National Instruments RMX-410 Series, Руководство пользователя, Страница: 114 / 132

113
NATIONAL
INSTRUMENTS
:MODE OFF|FSTR|TRIG Set output trigger mode <NC>
:RELay {1|2}
[:STATe] <bool> Set control pins status REL{1|2}[?]
:MODE? Returns the operation mode CV/CC/OFF MODE?
[SOURce]
:CURRent
[:LEVel]
[:IMMediate]
[:AMPLitude] <NRf+> [:AMPLitude] <NRf+> Set the output current PC[?]
:TRIGger <NRf+> Set the triggered output current <NC>
:MODE NONE|FIX|LIST|WAVE Select arbitrary trigger control mode <NC>
:VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <NRf+> Set the output voltage PV[?]
:TRIGger <NRf+> Set the triggered output voltage <NC>
:PROTection
:LEVel <NRf+> Set over-voltage protection level OVP[?],OVM
: LOW
:STATe UVP|UVL Set under-voltage limit or protection mode UV?(*)
:[LEVel] <NRF+> Set under-voltage level UVP,UVL
:MODE NONE|FIX|LIST|WAVE Select arbitrary control mode <NC>
:LIST
:COUNt {0…9999,Inf} Set number of time execution <NC>
:CURRent <NRf+> Set output current points <NC>
:LOAD {1|2|3|4} Load stored LIST program from memory <NC>
:STEP ONCE|AUTO Set trigger depends execution step <NC>
:STORe {1|2|3|4} Store LIST program in memory <NC>
:DWELl <NRf+> Set time interval <NC>
:VOLTage <NRf+> Set output voltage points <NC>
:WAVE
:COUNt {1…9999,Inf} Set number of time execution <NC>
:CURRent <NRf+> Set output current points <NC>
:LOAD {1|2|3|4} Load stored WAVE program from memory <NC>
:STEP ONCE|AUTO Set trigger depends execution step <NC>
:STORe {1|2|3|4} Store WAVE program in memory <NC>
:TIME <NRf+> Set slope time <NC>