User Guide
QuickSyn Frequency Synthesizer
38 of 44
The Edit List dialog box, shown in Figure 39, is accessible by
selecting the Create/Edit List button on the List Mode panel.
Point Number, Frequency, Power and Dwell Time
These
entry boxes enable the user to specify point number, frequency,
power, and dwell time values for creating sweep lists. To specify
a value in these entry boxes, highlight the number in the box of
the parameter you wish to set and enter a new value or use the up/
down arrows on the left side of the entry box.
Output ON/OFF
The Output ON/OFF buttons located next to
the Dwell Time entry boxes in the Edit List dialog box are used to
control the RF output signal at the specified point. When selected
the indicator on the button will illuminate and RF output will be
enabled.
Clear Current List
This button is used to clear data in all entry
boxes in the Edit List dialog box.
Figure 39
Edit List Dialog Box
Step 5-5 Review the Edit List Dialog Box
