© 2013–2014 National Instruments. All rights reserved.
374004C-01
Oct14
Refer to the
NI Trademarks and Logo Guidelines
at
ni.com/trademarks
for more information on National Instruments trademarks. Other
product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National
Instruments products/technology, refer to the appropriate location:
Help»Patents
in your software, the
patents.txt
file on your media, or the
National Instruments Patents Notice
at
ni.com/patents
. You can find information about end-user license agreements (EULAs) and third-party
legal notices in the readme file for your NI product. Refer to the
Export Compliance Information
at
ni.com/legal/export-compliance
for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES
NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR
ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable
limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
32. Repeat steps 10 through 23 with the new settings and the following changes:
•
In step 16, set the DDC center frequency to 215 MHz -
RF Source 1 Frequency
•
In step 23, add 30 kHz to the list of frequencies to measure
33. Close the IF response calibration step.
34. Close the external calibration session.
Reverification
Repeat the
section to determine the as-left status of the device.
Note
If any test fails reverification after performing an adjustment, verify that you
before returning your device to NI. Refer to
for information about support resources or service requests.
Worldwide Support and Services
The National Instruments website is your complete resource for technical support. At
you have access to everything from troubleshooting and application development
self-help resources to email and phone assistance from NI Application Engineers.
for NI Factory Installation Services, repairs, extended warranty, and
other services.
to register your National Instruments product. Product registration
facilitates technical support and ensures that you receive important information updates from NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the European
Communities using the manufacturer’s declaration of conformity. This system affords the user
protection for electromagnetic compatibility (EMC) and product safety. You can obtain the DoC
for your product by visiting
. If your product supports calibration,
you can obtain the calibration certificate for your product at
National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world. For
telephone support in the United States, create your service request at
or dial
1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the
Worldwide Offices section of
to access the branch office websites, which
provide up-to-date contact information, support phone numbers, email addresses, and current
events.
