![background image](http://html1.mh-extra.com/html/national-instruments/pci-8361/pci-8361_user-manual_3646934024.webp)
Table 1-3 provides information on which daisy-chaining boards can be connected to
corresponding targets.
Table 1-3.
MXI-Express x1 Daisy-Chain Connectivity Support For Daisy-Chaining
From Chassis
Targets
PXI Chassis
VXI
Chassis
PXI Express
Chassis
MXI-Express
RIO
Slot
Type
Product
PXI-
8360
PXI-
8368
PXI-
1033*
VXI-
8360T
PXIe-
8360
PXIe-
1073*
NI
9157*
NI
9159*
PXI or
PXIe
Hybrid
PXI-8364
—
—
†
—
†
—
†
—
†
**
**
PXI-8367
—
—
—
—
—
—
—
PXI
Express
or PXIe
Hybrid
PXIe-8364
Express
Card
‡
ExpressCard
-8360
* Product has an integrated MXI-Express x1 port.
†
These configurations are not supported, even though the front panel MXI connectors are mechanically compatible.
For these configurations the boards will likely report a valid cable link via the front panels LEDs. Since these link
scenarios expose a possible data integrity issue that may not be obvious to the user, National Instruments strongly
recommends against using these configurations.
** Daisy-chaining from PXI Express or ExpressCard slots will give better throughput and latency performance than
PXI or PXI Express hybrid slots.
‡
ExpressCard slot of an NI embedded controller that is installed in the first chassis.
Note
: For installation instructions and other information concerning the PXI-1033, PXIe-1073, VXI-8360T, NI 9157,
NI 9159, and the NI 3100/3110, refer to their respective user manuals.