![background image](http://html1.mh-extra.com/html/national-instruments/pci-6810/pci-6810_getting-started_709879063.webp)
Index
Getting Started with Your PCI/PXI-6810 SDA
I-2
©
National Instruments Corporation
external power
for digital I/O interface
operating characteristics, A-3
requirements, A-3
EXT pin for supplying, 4-4
EXT_PWR signal (table), 4-3
F
fax and telephone support numbers, B-2
Fax-on-Demand support, B-2
FTP support, B-1
G
general purpose transceivers
description, 3-3
specifications
receiver, A-2
transmitter, A-2
GND signal (table), 4-3
GPC signal (table), 4-4
GPCH<0..1> signal (table), 4-4
H
hardware
description, 1-1 to 1-2
functional overview, 3-1 to 3-3
adjustable voltage transceivers, 3-3
block diagram, 3-2
DAQ DIO ASIC, 3-2
MITE ASIC, 3-2
numerically controlled oscillator
(NCO), 3-2
RS-232 transceivers, 3-3
RS-485 transceivers, 3-3
serial data processor, 3-3
static digital I/O, 3-3
installation, 2-3 to 2-5
I
I/O connector
pin assignments (figure), 4-2
signal descriptions (table), 4-3 to 4-4
installation. See also configuration.
hardware installation, 2-3 to 2-5
PCI-6810, 2-3 to 2-4
PXI-6810, 2-4 to 2-5
software installation, 2-2 to 2-3
development environment, 2-2
run-time-only environment, 2-3
unpacking PCI/PXI-6810, 1-8
instrument driver. See Serial Data Analyzer
instrument driver.
internal clock specifications, A-1
J
J2 connector
damage to equipment by sub-bus driven
lines (caution), 1-4
pin assignments (table), 1-5
L
LabVIEW and LabWindows/CVI
software, 1-6
low-voltage power switch, alternate, 2-1 to 2-2
M
manual. See documentation.
MITE ASIC, 3-1, 3-2