manualshive.com logo in svg

National Instruments NI PXI-665 Series, Руководство пользователя

Поделиться
Скачать
National Instruments NI PXI-665 Series Скачать руководство пользователя страница 10

1-2

|

ni.com

Chapter 1

Introduction

Unpacking

The NI PXI-665

x

 is shipped in an antistatic package to prevent electrostatic damage to the 

module. Electrostatic discharge (ESD) can damage several components on the module.

Caution

Never

 touch the exposed pins of connectors.

To avoid such damage in handling the module, take the following precautions:
•

Ground yourself using a grounding strap or by touching a grounded object.

•

Touch the antistatic package to a metal part of the computer chassis before removing the 
module

 

from the package.

Remove the module

 

from the package and inspect the module

 

for loose components or any sign 

of damage. Notify NI if the module

 

appears damaged in any way. Do 

not

 install a damaged 

module

 

into the computer.

Store the NI PXI-665

x

 in the antistatic envelope when not in use.

Software Programming Choices

When programming the NI PXI-665

x

, you can use NI application development environment 

(ADE) software such as LabVIEW or LabWindows/CVI, or you can use other ADEs such as 
Visual C/C++.

LabVIEW features interactive graphics, a state-of-the-art interface, and a powerful graphical 
programming language. The LabVIEW Data Acquisition VI Library, a series of virtual 
instruments for using LabVIEW with National Instruments DAQ hardware, is included with 
LabVIEW.

LabWindows/CVI is a complete ANSI C ADE that features an interactive user interface, code 
generation tools, and the LabWindows/CVI Data Acquisition and Easy I/O libraries. 

Safety Information

The following section contains important safety information that you 

must

 follow when 

installing and using the product.

Do 

not

 operate the product in a manner not specified in this document. Misuse of the product 

can result in a hazard. You can compromise the safety protection built into the product if the 
product is damaged in any way. If the product is damaged, return it to National Instruments for 
repair.

Do 

not

 substitute parts or modify the product except as described in this document. Use the 

product only with the chassis, modules, accessories, and cables specified in the installation 
instructions. You 

must

 have all covers and filler panels installed during operation of the product.

Содержание NI PXI-665 Series




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды