What You Need to Start Using the CompactRIO
System
After you install the CompactRIO chassis, controller, and C Series modules, you need the
following things to start using the CompactRIO system:
•
Windows computer with LabVIEW and NI-RIO software installed
•
—learn how to install, set up, and configure your CompactRIO
hardware and learn the basics of LabVIEW software.
•
LabVIEW Help
—access information about LabVIEW programming concepts, step-by-
step instructions for using LabVIEW, and reference information about LabVIEW VIs,
functions, palettes, menus, tools, properties, methods, events, dialog boxes, and so on.
Installing the Controller on the Chassis
Complete the following steps to install the controller on the chassis.
1.
Make sure that no power is connected to the controller or the chassis.
2.
Align the controller with the chassis.
4
|
ni.com
|
NI cRIO-9111/9112/9113/9114/9116/9118
