This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Special Conditions for Marine Applications
Some products are Lloyd’s Register (LR) Type Approved for marine (shipboard) applications.
To verify Lloyd’s Register certification for a product, visit
the LR certificate, or look for the Lloyd’s Register mark on the product.
Caution
In order to meet the EMC requirements for marine applications, install the
product in a shielded enclosure with shielded and/or filtered power and input/output
ports. In addition, take precautions when designing, selecting, and installing
measurement probes and cables to ensure that the desired EMC performance is
attained.
What You Need to Install the CompactRIO
System
•
CompactRIO reconfigurable embedded chassis
•
CompactRIO intelligent real-time embedded controller
•
C Series I/O modules
•
Mounting hardware if needed (available from NI)
•
Two M4 or number 10 panhead screws (for panel mounting only)
•
Number 2 Philips screwdriver
•
Power supply
•
Ethernet cable
•
–
cRIO controller documentation—learn how to connect the controller to a network
and configure the controller.
–
C Series modules documentation—learn about module specifications and how to use
the modules.
NI cRIO-9111/9112/9113/9114/9116/9118
|
© National Instruments
|
3