Installing C Series I/O Modules in the Chassis
Figure 12. C Series I/O Module, Side and Front View with Dimensions
22.9 mm
(0.90 in.)
88.1 mm
(3.47 in.)
88.1 mm
(3.47 in.)
Note
Modules with different connector types have different dimensions. Go to
and enter
rdcrioconn
for more information about the different
connector types.
Complete the following steps to install a C Series I/O module in the chassis.
1.
Make sure that no I/O-side power is connected to the I/O module. If the system is in a
nonhazardous location, the chassis power can be on when you install I/O modules.
2.
Align the I/O module with an I/O module slot in the chassis. The module slots are labeled
1 to 8, left to right.
NI cRIO-9111/9112/9113/9114/9116/9118
|
© National Instruments
|
11