![background image](http://html1.mh-extra.com/html/national-instruments/ni-9901/ni-9901_user-manual_3439283003.webp)
Figure 1. Installing the Adapter Bracket
1
2
3
1. R Series expansion chassis
2. cDAQ and cRIO chassis
3. cRIO-905x chassis
1.
Use the #1 Phillips or the T-10 Torx screwdriver to remove the two screws from the back
of the chassis on the controller side.
2.
Use the #1 Phillips screwdriver and the two M3 screws to attach the adapter bracket to
the chassis.
Note
Tighten the screws to a maximum torque of 0.55 N · m (4.9 lb · in.).
Installing the Mounting Bracket
What to Use
•
Mounting bracket
•
Screwdriver, #2 Phillips, user-provided
NI 9901 User Manual
|
© National Instruments
|
3