![background image](http://html1.mh-extra.com/html/national-instruments/ni-9901/ni-9901_user-manual_3439283002.webp)
Installing the NI 9901 on a Chassis
Installing the Adapter Bracket
If you are installing the NI 9901 on a chassis that does not provide mounting holes at both
ends of the chassis, you must install the adapter bracket on the back of the chassis.
What to Use
•
Adapter bracket appropriate for your chassis
•
M3 screws appropriate for your chassis
•
Screwdriver, #1 Phillips or T-10 Torx, depending on your chassis, user-provided
What to Do
Follow these steps to mount the adapter bracket on the chassis.
Note
You must use the screws provided with the NI desktop mounting kit because
they are the correct depth and thread for the panel mounting plate. Refer to the
chassis documentation to determine the correct screw size.
2
|
ni.com
|
NI 9901 User Manual