Programmable Chips
You can program the following chips from the CLIP.
Table 4. Programmable Chips
Chip
Part Number
ADC
TI ADS4246
DAC
TI DAC3482
Clock Distribution
ADI AD9511
Frequency/Phase Adjust DAC
ADI AD5541
EEPROM
SST25VF080B
Programmable RF Attenuator
Peregrine PE43703
Using Your NI 5791R with a LabVIEW FPGA
Example VI
Note
You must install the software before running this example. Refer to the
NI FlexRIO FPGA Installation Guide and Specifications
for more information about
installing your software.
The NI FlexRIO Adapter Module Support software includes an example project to help you
get started creating your LabVIEW FPGA application. This section explains how to use an
existing LabVIEW FPGA example project to generate and acquire samples with the NI 5791R.
This example requires at least one SMA cable for connecting signals to your NI 5791R.
Note
The examples available for your device are dependent on the version of the
software and driver you are using. For more information about which software
versions are compatible with your device, visit
ni.com/info
, enter
rdsoftwareversion
in the text field, and click the NI FlexRIO link in the results.
The NI 5791R example project includes the following components:
•
A LabVIEW FPGA VI that can be compiled and run on the FPGA embedded in the
hardware
•
At least one VI that runs on Windows and interacts with the LabVIEW FPGA VI
Note
In the LabVIEW FPGA Module software, NI FlexRIO adapter modules are
referred to as
IO Modules
.
NI 5791R User Manual and Specifications | © National Instruments | 13