National Instruments NI-5783, Руководство по началу работы

Страница: 3 / 15

Worldwide Support and Services............................................................................................ 12
Where to Go Next................................................................................................................... 12
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution
To ensure the specified EMC performance, the length of all I/O cables
must be no longer than 3 m (10 ft).
FlexRIO Documentation
Table 1. FlexRIO Documentation Locations and Descriptions
Document Location Description
Getting started guide
for your FlexRIO
FPGA module or
Controller for
FlexRIO Available from the Start menu
and at
ni.com/manuals .
Contains installation instructions
for your FlexRIO system.
Specifications
document for your
FlexRIO FPGA
module or Controller
for FlexRIO Available from the Start menu
and at
ni.com/manuals .
Contains specifications for your
FlexRIO FPGA module or
Controller for FlexRIO.
Getting started guide
for your adapter
module Available from the Start menu
and at
ni.com/manuals
.
Contains signal information,
examples, and CLIP details for
your adapter module.
2 | ni.com | NI 5783 Getting Started Guide