USER MANUAL AND SPECIFICATIONS
NI 5772R
Digitizer Adapter Module
The NI 5772 is a high-speed digitizer adapter module designed to work in conjunction with
your NI FlexRIO
™
FPGA module. The NI 5772 features two analog input (AI) channels with
12-bit resolution and sample rates up to 800 MS/s when using both channels or sample rates
up to 1.6 GS/s when using only one channel. The NI 5772R is available in two versions: an
AC-coupled version and a DC-coupled version.
This document contains signal information and lists the specifications of the NI 5772R, which
is composed of the NI FlexRIO FPGA module and the NI 5772. This document also contains
tutorial sections that demonstrate how to acquire data using a LabVIEW FPGA Example VI
and how to create and run your own LabVIEW project with the NI 5772R.
Note
NI 5772R
refers to the combination of your NI 5772 adapter module and
your NI FlexRIO FPGA module.
NI 5772
refers to your NI 5772 adapter module
only.
Note
Before configuring your NI 5772R, you must install the appropriate software
and hardware. Refer to the
NI FlexRIO FPGA Module Installation Guide and
Specifications
for installation instructions.
The following figure shows an example of a properly connected NI FlexRIO device.
Figure 1.
NI FlexRIO Device
NI FlexRIO
Adapter Module
+
=
NI FlexRIO Device
NI FlexRIO
FPGA Module
Contents
Содержание NI 5772R
Страница 1: ...NI 5772...
