![background image](http://html1.mh-extra.com/html/national-instruments/ni-5772r/ni-5772r_user-manual-and-specifications_3521866003.webp)
Creating a LabVIEW Project and Running a VI on an FPGA Target............................13
AUX I/O (Port 0 DIO <0..3>, Port 1 DIO <0..3>, and PFI <0..3>)...............................29
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, you must install PXI EMC
Filler Panels (National Instruments part number 778700-01) in adjacent chassis
slots. Installing PXI EMC Filler Panels in all empty slots is recommended. You can
2 |
NI 5772R User Manual and Specifications
| ni.com
Содержание NI 5772R
Страница 1: ...NI 5772...