background image

Note

 

The guidelines in this document are specific to the MON-10496. The other

components in the system might not meet the same safety ratings. Refer to the
documentation for each component in the system to determine the safety and EMC
ratings for the entire system.

Contents

Related Documentation.............................................................................................................2
Unpacking................................................................................................................................. 3
Kit Contents.............................................................................................................................. 3
What You Need to Get Started..................................................................................................3
Safety........................................................................................................................................ 4
EMC Notices.............................................................................................................................5
Parts Diagrams.......................................................................................................................... 6

Exterior Parts Diagram......................................................................................................6
Interior Parts Diagram.......................................................................................................7

Internal Real-Time Clock (RTC)...............................................................................................7
Real-Time Clock (RTC) Battery............................................................................................... 7
Opening and Closing the Door..................................................................................................8
Mounting...................................................................................................................................8
Installing the Antenna and Boot................................................................................................9
Connecting.............................................................................................................................. 10

Wiring Guidelines........................................................................................................... 10
Connecting the Ethernet Cable........................................................................................11
Connecting Power and Ground....................................................................................... 12

Using the Desiccant Kit.......................................................................................................... 14
Network Connection............................................................................................................... 15

Troubleshooting Network Communication.....................................................................16

Battery Replacement and Disposal......................................................................................... 16
Where to Go Next................................................................................................................... 17
Product Certifications and Declarations................................................................................. 17
Worldwide Support and Services............................................................................................ 17

Related Documentation

The following documents contain information about the MON-10496. To view them, go to 

ni.com/manuals

.

MON-10496 Safety, Environmental, and Regulatory Information

MON-10496 Specifications

For help using your device in NI InsightCM

, refer to the NI InsightCM Help in software or

online at 

ni.com/r/insightcmhelp

.

2

  | 

ni.com

  | 

MON-10496 User Guide

Содержание MON-10496



















Отзывы: