Introduction
Chapter 1
GPIB-130 User Manual
1-4
© National Instruments Corporation
Optional Equipment
Equipment
Part Number
Transmission Cables:
•
Type T5 (NEC CL2 rated) – up to 50 m
•
Type T2 (NEC CL2 rated) – 0 m to 300 m
•
Type T6 (NEC CL2P-Plenum rated) – 0 m to 300 m
(xxx
= length in meters)
181563-xxx
178056-xxx
181564-xxx
Type X1 GPIB Cable (Single-Shielded)*:
•
1 m
•
2 m
•
4 m
763001-01
763001-02
763001-03
Type X2 GPIB Cable (Double-Shielded)*:
•
1 m
•
2 m
•
4 m
763061-01
763061-02
763061-03
*
To meet FCC emission limits for this Class A device, you must use a shielded (Type X1
or X2) GPIB cable. Operating this equipment with a non-shielded cable may cause
interference to radio and television reception in commercial areas.
Unpacking Your GPIB-130
Follow these steps when unpacking your GPIB-130.
1. Verify that the pieces contained in the package you received match the kit parts list given
earlier in this section.
2. Inspect the shipping container and contents for damage. If the container is damaged and the
damage appears to have been caused in shipment, file a claim with the carrier. If the
equipment is damaged, do not attempt to operate it. Contact National Instruments for
instructions. Retain the shipping material for possible inspection by carrier or reshipment of
the equipment.