background image

Service Manual

Philips Consumer Lifestyle

Published by Philips Consumer Lifestyle 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

 

Baby food Steamer & Blender

SCF870/20
SCF870/21
SCF870/22
SCF870/23

12/04

PRODUCT INFORMATION

Type number

: SCF870/20

Device description:

Preparation of healthy food for children up to an age of 
24 months at home.  Steam and blend fruits, vegetables, 
pasta, meat and fi sh without transfer.

Features

 

- Steam and blend without transfer

 

- Quick steam time:  Perceived as fast as the best 

competitor

 

- 600 ml minimum food capacity

 

- Auto switch off after steaming with a clear indicator

 

- Easy to clean with detachable knife interface 

(dishwasher safe)

The Wasabi is a kitchen device for fast and easy preparation 
of healthy home made food for babies and weaners.
The parents steams fresh foods, add additional ingredients 
and blend them together to a mash within the same jar.
The appliance is intended for:
• Dry use.
• Home use.

Safety

 

- This product meets the requirements regarding interference 

suppression on radio and TV.

 

- After the product has been repaired, it should function 

properly and has to meet the safety requirements as 
officially laid down at this moment.

TECHNICAL INFORMATION

 

- Tool speed:  No load 

:  5800 rpm

 

- Steam rate 

:  10 g/min

 

- Boiler net volume 

:  200 ml

 

- Boiler gross volume 

:  300 ml

The overall size and weight of the device is:

 

- Total height 

:  308 mm

 

- Total width 

:  187 mm

 

- Total depth 

:  201 mm

 

- Weight (empty) 

: < 3 kg

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

 

- No specific issues.

REPAIR INSTRUCTION

 

- No specific issues.

OPTIONAL (accessories)

 

- No specific issues.

Summary of Contents for SCF870/20










Reviews: