flash disk drives or USB CD-ROM drives, or the PXE network boot agent. The BIOS
first attempts to boot from the device associated with 1st Boot Device, followed by 2nd
Boot Device and 3rd Boot Device. If multiple boot devices are not present, the BIOS
setup utility does not display all of these configuration options. To select a boot device,
press <Enter> on the desired configuration option and select a boot device from the
resulting menu. You can also disable certain boot devices by selecting
Disabled
.
Note
Only one device of a given type is shown in this list. If more than one
device of the same type exists, use the appropriate device BBS priorities
submenu to re-order the priority of devices of the same type.
The Boot Setup menu displays the following submenus when one or more bootable devices of
the corresponding type is present:
•
Hard Drive BBS Priorities Submenu
•
CD/DVD ROM Drive BBS Priorities Submenu
•
Floppy Drive BBS Priorities Submenu
•
Network Device BBS Priorities Submenu
Boot Settings Configuration Submenu
The Boot Settings Configuration submenu applies alternate configurations to boot settings.
The factory default settings provide the most compatible and optimal configuration.
•
Setup Prompt Timeout—This setting specifies the number of seconds the system waits
for a BIOS Setup menu keypress (the <Delete> key). The default value is
2
seconds.
•
Bootup NumLock State—This setting specifies the power-on state of the keyboard
NumLock setting. The default value is
On
.
Hard Drive BBS Priorities Submenu
The Hard Drive BBS Priorities submenu specifies the boot priority of hard drive devices.
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify that the main Boot
Option Priorities list displays the highest priority device. Optionally, each device can be
disabled if the device is not used as a boot device.
CD/DVD ROM Drive BBS Priorities Submenu
The CD/DVD ROM Drive BBS Priorities submenu specifies the boot priority of CD/DVD
ROM drive devices.
Boot Option #1, Boot Option #2, Boot Option #3—These settings specify that the main Boot
Option Priorities list displays the highest priority device. Optionally, each device can be
disabled if the device is not used as a boot device.
Floppy Drive BBS Priorities Submenu
The Floppy Drive BBS Priorities submenu specifies the boot priority of floppy drive devices.
NI cRIO-9034 User Manual
|
© National Instruments
|
39
