Table 18. User LEDs
LED
LED Color
Description
USER1
Green/Yellow Use LabVIEW Real-Time to define the USER1 LED with the
RT LEDs VI. For more information about the RT LEDs VI,
refer to the
LabVIEW Help
.
USER
FPGA1
Green/Yellow Use the LabVIEW FPGA Module and NI-RIO Device Drivers
software to define the USER FPGA1 LED. Use the USER
FPGA1 LED to help debug your application or retrieve
application status. Refer to the
LabVIEW Help
for information
about programming this LED.
Ethernet LED Indicators
The following table lists the Ethernet LED indicators.
Table 19. Ethernet LED Indicators
LED
LED Color
LED Pattern
Indication
ACT/LINK
—
Off
LAN link not established
Green
Solid
LAN link established
Flashing
Activity on LAN
10/100/1000
Yellow
Solid
1,000 Mbit/s data rate selected
Green
Solid
100 Mbit/s data rate selected
—
Off
10 Mbit/s data rate selected
SD LED Indicators
The cRIO-9034 has two LEDs that indicate the SD card drive mount status and activity. The
following table lists SD LED indicators.
Table 20. SD LED Indicators
LED
LED Color LED Pattern
Indication
SD ACT
Yellow
Off
There is no I/O activity on the SD card in the slot.
Flashing
The cRIO-9034 is performing I/O on the SD card in
the slot. Do not remove the SD card while this LED
is flashing.
NI cRIO-9034 User Manual
|
© National Instruments
|
19
