manualshive.com logo in svg

National Instruments AT-GPIB/TNT, Начало работы, Страница: 37 / 64

Поделиться
Скачать
National Instruments AT-GPIB/TNT Скачать руководство пользователя страница 37

©

 National Instruments Corporation

3-1

AT-GPIB/TNT for Windows 98/95

Chapter

3

Verify the Installation

This chapter describes how to verify the hardware and software 
installation.

The Diagnostic utility, installed with your GPIB software, verifies that 
your hardware and software are functioning properly. To run the utility, 
select the Diagnostic item under Start»Programs»National 
Instruments GPIB. 

When you have started the Diagnostic utility, test your GPIB interfaces 
by clicking on the Test All button. If the Diagnostic is successful, it puts 
a checkmark next to the interface and changes its status from “untested” 
to “passed.” If the Diagnostic fails, it puts an X next to the interface, 
and changes its status from “untested” to “failed.” Figure 3-1 shows the 
Diagnostic utility after it has tested some GPIB interfaces.

Figure 3-1.  Diagnostic Utility after Testing

You can get details on any tested GPIB interface by selecting the 
interface and clicking on the Details button. For each failed GPIB 
interface, select it and click on the Details button to get a description of 
the failure. Use that information and the information in Appendix C, 

Specifications

, to troubleshoot the problem. Troubleshooting 

information is also available in the online help for the Diagnostic 
utility, which you can access by clicking on the Help button.

Содержание AT-GPIB/TNT

































































Отзывы:

Нет отзывов