manualshive.com logo in svg

National Instruments AT-GPIB/TNT, Начало работы, Страница: 23 / 64

Поделиться
Скачать
National Instruments AT-GPIB/TNT Скачать руководство пользователя страница 23

Chapter 2

Installation and Configuration

AT-GPIB/TNT for Windows 98/95

2-6

©

 National Instruments Corporation

Configure the AT-GPIB/TNT

Caution:

Electrostatic discharge can damage several components on the 
AT-GPIB/TNT. To avoid such damage in handling the board, touch the 
antistatic plastic package to a metal part of your computer chassis before 
removing the board from the package. 

Configure the AT-GPIB/TNT jumpers and switches to match the 
resources assigned to it by Windows. If the resources assigned to it 
match the default settings, you are ready to install the AT-GPIB/TNT. 

Table 2-1 shows the default settings for the switches and jumpers on the 
GPIB board.

If the resources do not match the default settings, you must reconfigure 
the jumpers and switches, as described in the next few sections, to 
match the resources assigned to the AT-GPIB/TNT by Windows. 
Figure 2-5 shows the location of the configuration jumpers and 
switches on the AT-GPIB/TNT.

Table 2-1.  AT-GPIB/TNT Hardware Default Settings

GPIB Board Setting

Default

I/O range

2C0-2DF

DMA channel

5

Interrupt line (IRQ)

11

!

Содержание AT-GPIB/TNT

































































Отзывы:

Нет отзывов