Index
I-2
©
National Instruments Corporation
multiple AMUX-64T board
addressing (table), 5-5
scanning counter control bits
(figure), 5-3
addressing analog input channels,
5-3 to 5-6
component positions in each channel
(table), 4-2 to 4-4
configuring input mode, 4-5
cold-junction compensation, 3-5
cold-junction sensor specifications, A-3
configuration, 2-1 to 2-10
channel configurations, 4-5
four-board configuration
instructions, 2-9
switch settings (table), 2-10
jumpers and switches on AMUX-64T, 2-1
multiple board configuration
channel ranges for multiple boards
(table), 2-8
daisy-chaining multiple boards
(figure), 2-8
jumper settings (table), 2-7
parts locator diagram (figure), 2-2
power supply selection
MIO board power budget (table), 2-5
supplementary information,
2-4 to 2-5
switch settings (table), 2-3
shield selection
jumper settings (table), 2-4
supplementary information, 2-6
single board configuration
factory settings, 2-9
jumper settings (table), 2-7
temperature sensor selection
jumper settings (table), 2-3
supplementary information,
2-5 to 2-6
two-board configuration
instructions, 2-9
switch settings (table), 2-9
customer communication, xii, B-1 to B-2
D
differential inputs
ground-referenced signal sources, 4-7
nonreferenced or floating signal sources,
4-5 to 4-6
signal connections, 3-5
differential measurement of thermocouples
example, 3-9 to 11
procedure, 3-9
documentation
conventions used in manual, x
National Instruments documentation, xi
organization of manual, ix-x
related documentation, xi
E
electronic support services, B-1 to B-2
e-mail support, B-2
environment specifications, A-4
equipment, optional, 1-7
errors in thermocouple measurement, sources
of, 3-12
F
fax and telephone support numbers, B-2
Fax-on-Demand support, B-2
filters. See highpass filters; lowpass filters.
floating signal sources, 4-5 to 4-6
bias return resistor for DC-coupled
floating source (figure), 4-6
differential inputs, 4-5 to 4-6
single-ended inputs, 4-6
FTP support, B-1
