![background image](http://html2.mh-extra.com/html/national-instruments/9792/9792_getting-started-manual_3397788011.webp)
©
National Instruments Corp.
11
NI Wireless Sensor Network Devices
3. Expand the listing for the NI WSN gateway in the
NI LabVIEW project to see the NI WSN-32
xx
nodes
connected to it. Expand each node to list the I/O variables.
If the gateway is not on the local subnet, complete the
following steps:
a. Right-click the project name and select
New»Targets and
Devices
,
click
Existing target or device
, and click
Specify a target or device by IP address
.
b. Select
IP Address
and enter the IP address.
c. Expand the
WSN Gateway
folder and select the Gateway
type and click
OK
.
d. To add the nodes, right click the gateway in the project and
select
New»Targets and Devices
. Expand the
WSN Node
folder, select the node, and click
OK
.