NI Wireless Sensor Network Devices
6
ni.com
Step 3. Install NI-WSN Software on the NI-9792
If using a NI 9792, complete the following steps to install NI-WSN
software on the NI 9792 WSN Real-Time Gateway:
1. Launch MAX.
2. Expand
Remote Systems
to confirm that MAX detects the
NI 9792. If MAX is not detecting your device, refer to step 2
of
Step 4. Configure the NI WSN System
3. Click on
Software
and select
Add/Remove
.
4. Install NI-WSN for LabVIEW software.
Step 4. Configure the NI WSN System
You must configure the NI WSN devices in MAX before using
NI LabVIEW to take measurements. For information about
configuring the WSN system, refer to
Start»Programs»National
Instruments»NI-WSN»Configuring WSN in MAX
. To confirm
device recognition and configure the NI WSN system, complete
the following steps:
1. Launch MAX.