©
National Instruments Corp.
5
NI Wireless Sensor Network Devices
Step 2. Install the NI-WSN Software on the
PC Host
You must be an Administrator to install NI software and devices on
your computer. To use the NI WSN-9791 Gateway, you must have
NI LabVIEW 8.6.1 or later installed. To use the NI 9792 WSN
Real-Time Gateway, you must have NI LabVIEW 2009 SP1
(32-bit) or later, and NI LabVIEW 2009 SP1 (32-bit) Real-Time
Module or later installed. To use the NI WSN-3226 node, you must
have NI LabVIEW 2010 or later installed. To install the NI-WSN
software, complete the following steps:
1. Close all other applications.
2. Install NI LabVIEW.
3. For the NI 9792, refer to the instructions included with your
NI LabVIEW software and install the NI LabVIEW 2009 SP1
(32-bit) Real-Time Module or later.
4. Insert the NI-WSN software installation disc into your
computer.
5. Follow the onscreen instructions to install the NI-WSN
software.