National Instruments Corporation SCXI-1162 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 97

background image

Introduction

Chapter 1

SCXI-1162 User Manual

1-2

© National Instruments Corporation

What Your Kit Should Contain

The contents of the SCXI-1162 kit (part number 776572-62) are listed as follows.

Kit Component

Part Number

SCXI-1162 module

182246-01

SCXI-1162 User Manual

320572-01

If your kit is missing any of the components, contact National Instruments.

Optional Software

This manual contains complete instructions for directly programming the SCXI-1162. You can
order separate software packages for controlling the SCXI-1162 from National Instruments.

When you combine the PC, AT, and MC data acquisition boards with the SCXI-1162, you can
use LabVIEW for Windows or LabWindows

®

for DOS. LabVIEW and LabWindows are

innovative program development software packages for data acquisition and control applications.
LabVIEW uses graphical programming, whereas LabWindows enhances Microsoft C and
QuickBASIC. Both packages include extensive libraries for data acquisition, instrument control,
data analysis, and graphical data presentation.

Your National Instruments data acquisition board is shipped with the NI-DAQ software.
NI-DAQ has a library of functions that can be called from your application programming
environment. These functions include routines for analog input (A/D conversion), buffered data
acquisition (high speed A/D conversion), analog output (D/A conversion), waveform generation,
digital I/O, counter/timer, SCXI, RTSI, and self-calibration. NI-DAQ maintains a consistent
software interface among its different versions so you can switch between platforms with
minimal modifications to your code.

You can also use the SCXI-1162, together with the PC, AT, and MC data acquisition boards,
with NI-DAQ software for DOS/Windows/LabWindows. NI-DAQ software for
DOS/Windows/LabWindows comes with language interfaces for Professional BASIC, Turbo
Pascal, Turbo C, Turbo C++, Borland C++, and Microsoft C for DOS; and Visual Basic, Turbo
Pascal, Microsoft C with SDK, and Borland C++ for Windows. NI-DAQ software for
DOS/Windows/LabWindows is on high-density 5.25 in. and 3.5 in. diskettes.

You can use the SCXI-1162, together with the NB Series data acquisition boards, with
LabVIEW for Macintosh, a software system that features interactive graphics, a state-of-the-art
user interface, and a powerful graphical programming language. The LabVIEW Data
Acquisition VI Library, a series of VIs for using LabVIEW with National Instruments boards, is
included with LabVIEW. The LabVIEW Data Acquisition VI Library is functionally equivalent
to the NI-DAQ software for Macintosh.

«
...
12
13
14
15
16
...
»

Содержание SCXI-1162


































































































Отзывы:

Нет отзывов

Похожие инструкции для SCXI-1162

Бренд: CAME Страницы: 32

Бренд: Danfoss Страницы: 24

Бренд: Eaton Страницы: 28

Бренд: Parallel Страницы: 16

Бренд: V2 Страницы: 46

Бренд: Maestra Страницы: 22

Бренд: Nabco Страницы: 35

Grafica DNE-K07

Бренд: Paradox Страницы: 24

Бренд: Panosol Страницы: 105

Бренд: Pangolin Страницы: 8

1E0671-1 MCR2.9

Бренд: Haberl Electronic Страницы: 9

Бренд: J+J Страницы: 2

Бренд: Data Signs Страницы: 23

Бренд: Mitsubishi Страницы: 16

Бренд: SOMFY Страницы: 4

Бренд: Wenglor Страницы: 44

Бренд: HANYOUNG NUX Страницы: 4

Бренд: UniPOS Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды