National Instruments Corporation FieldPoint cFP-20 Series, Быстрый старт

Страница: 19 / 23

19 cFP-20xx Quick Start Guide
© National Instruments Corporation
S Sa avviin ng g H Ha arrd dw wa arre e C Co on nffiig gu urra attiio on n a ass P Po ow we err--U Up p S Stta atte e
When you are satisfied with the hardware configuration of the FieldPoint system, you can
save this configuration as the new power-up state for the system.
A. Right-click the cFP-20 xx controller in the left pane of FieldPoint Explorer, and select E Ed diitt
tth hiiss d de evviic ce e .
B. Clear the factory configuration checkbox.
C. Specify the power-up settings with either of the following options:
• If you want only the range and attribute settings you configured to be saved as
power-up states, click
O OK K
. These settings are written to the nonvolatile memory of
the controller.
• If you want to save power-up values for the range and attribute settings and also all
the current output states of the output channels, click S Sn na ap pssh ho ott . This stores the
current ranges, attributes, and output values of the bank to the nonvolatile memory of
the network module. Click
O OK K
when you are finished.
Refer to the user manual for more information about configuring and changing the power-up
values and configuring a network watchdog to guard against network failures.
11
C CA AU UT TIIO ON N Using the Snapshot feature overwrites any power-up values you have
specified for individual channels in the Channel Configuration dialog box.